If you need a FASTER, EASIER and SAFER storage system
The new, patented LIFT-n-LOCK is the answer.

Introduction & General Product Information

If you go into any store looking for any toolbox, craft box, tackle box, or whatever box, you will notice one thing in common. They have some type of exterior latch or catch that is used to keep them secure. This is where the Lift-n-Lock goes beyond the norm, and sets a new paradigm. It features zero external latches or catches.

I'm happy to say our search has ended after discovering what we feel might just be the best field box  available. PDY Systems' Lift-n-Lok is a tool box that features locking drawers that eliminate spilled parts. There's also ample space for large equipment.

How it works

So how does it work? Well, it is all in the handle. With the handle in the forward or upright position with the drawers closed, all the compartments are in the locked position. With the handle in the backward position, all the compartments are unlocked. You can also add a padlock to the mix, to keep your tools from walking away. I know it’s cool, but it goes ever further.

All toolboxes need a small margin of clearance so the drawers can slide in and out smoothly. The Lift-n-Lock closes these clearance gaps when it is in one of the locked positions. This means that even the smallest item placed in one of the drawers divided sections will not be able to jump sections while the Lift-n-Lock is locked. To test this, we used some of my mom’s smallest beads that are about 1/16 of an inch in diameter, some finishing nails, and some deck screws, then placed them in the various dividers of the Lift-n-Lock. We then proceeded to shake it like we was mixing a can of paint, only stopping after we got tired. The outcome was amazing considering the size of the beads. There was absolutely zero contamination, or divider jumping beads.

Features

Here are some of the features that you will get:

• The quickest and easiest fastening / unfastening system on the market for a system with drawers and a storage bin.
• Automatically fastens so it cannot be picked up by the handle without fastening the drawers and lid.
• No mixing between drawer compartments: the drawer clearance closes automatically when fastened which means that small items cannot jam drawer runners - everything stays in place.
• Our new system is extremely strong because it does not rely on the use of fragile catches, latches or flaps to fasten the drawers or under-lid tool bin.
• Easy to operate even when wearing gloves or with cold fingers.

Lockable

Drawers and lid are locked with a single 1.5” (40mm) padlock
(NOT included).

Specs:

Material: Polypropylene
Weight: 9lb 10oz
Height: 15.9"
Width: 11.25"
Length: 16.5"
Available colors: Bright orange, blue, olive green
Lockable: Yes. (Lock not included)

A good feature of the Lift-n-Lock is that the inside and bottom are lined with support ribs that add to its strength. You can actually stand on the case and not hurt it, but I advise against it since its not designed as a step. I have used the Lift-n-Lok as a seat when I'm adjusting something on my boats and it's very comfortable and it doesn't deform or bend when under my 220 lb rear! Finally, the Lift-n-Lok will accept a standard pad lock to keep people out of your box. There is a slot on the lid to lock it up tight.

What you get

The Lift-n-Lok is very well built, and is proudly made in the USA. You have a color choice of Orange/Grey, Blue/Grey, or Green/Brown fishing tackle box. It is constructed out of Polypropylene, and weighs in at 9lbs 10oz. When you first pick it up, you can tell how strong and sturdy the box is. The handle itself, although hollow, is very thick, and can probably stand up to anything you throw at it. Included with the Lift-n-Lok are 10 dividers for the top drawer, and 5 dividers for the middle drawer. The dividers are some of the best I have seen. They actually look a little thicker then the built in wall dividers. The grooves that hold the dividers are also very well built. The dividers are actually keyed to fit into the side grooves, and also rest inside of a bottom groove. So three sides of the dividers are completely held to prevent any movement from accruing.

Availability: Usually ships in 2-3 business days.

LiftNLockRegular price: $59.99Garage-Toys price: $54.95Color: Orange/GreyTan/GreenPink/GreyBlack/Grey