Shop by Category
Product Lines

Dock-Top 4x4 Section
Dock-Top 4x4 Section Cedar and PolyDock-Top 4x4 Section Cedar and Poly
Dock-Top 4x4 Section Cedar and Poly
Item#: 10860R
Regular price: $119.99
Sale price: $109.95

Product Description
One Dock-Top 4x4 drop-in section. Includes 4 Dock-Top panels assembled into one section for easy "drop-in" installation. Panels are connected with special clips.

Six clips and four deck lockers are included.

  • Poly Dock-Top Panels are designed for Patriot Docks, but will fit in any 4 frame with a 24 span. These are extended rib panels which can only be installed over framing which is at 24" on center. Deep rib design for added strength. Panels can be connected together with Dock-Top deck clips. Use 6 clips to make one 4x4 drop-in section using 4 panels.
    Dock-Top panels are molded out of polypropylene copolymer with UV inhibitors and mica reinforcement added. Panel section measures approximately 47-5/8" wide x 47-1/2" long. Fits most docks with single center support. Spans 24 inches.

  • Cedar decking is made of premium grade kiln dried western red cedar with approximately 10% knots. Decking is 5/4"x6" nominal. Pre-assembled 4' x 4' drop-in cedar panels make for easy handling. Three bottom rails are glued and screwed with corrosion resistant screws.
    The two end rails are located 1-7/8" in from the end of the decking. Center rail is offset to work on framing with either one (24" O.C.) or two (16" O.C.) interior stringers. Panel measures approximately 47-15/16" wide by 47-3/8".

  • Use deck lockers, screws or plastic cable ties to secure decking to the dock frame to prevent shifting or blowoff. Use two additional clips to connect 4x4 sections together into a continuous decking "sheet" for permanent installations.